Monday 16 March 2015

Advanced tutorials

Hi
I am doing an advanced masterclass on Brother Scanncut tonight at 7pm on Create and Craft.
Enjoy
Melanie x

21 comments:

  1. News of an advanced master class is great, but is this going to be available to view any other way? I lose the channel after 6:00 p.m. and I do not have broadband so cannot watch it online. Not everyone has other ways of watching or recording. Thanks!

    ReplyDelete
  2. hi mel i have reordered the scan and cut this time it has cut the test triangle :) thank you for the help last time

    ReplyDelete
  3. Can you tell how I can do the model of the house what somebody
    On the scanncut .and how do I get the svg files

    ReplyDelete
  4. Hi Mel, can you tell me why I can't use the Canvas - all I get is ErrS99 and I've tried Googling that to no avail. Thanks.

    ReplyDelete
    Replies
    1. Hi
      Can you contact me on melanieheaton@netscape.net so I can find out more info please.
      Thanks
      Melanie xxx

      Delete
    2. Do you know what ErrS99 means yet? I have been getting it all day

      Delete
    3. Do you know what ErrS99 means yet? I have been getting it all day

      Delete
  5. Hi Mel, having sync problems with my scanncut, update and calibrated, several times, get to 0 0 and try to cut but not right, contacted brother who promised a tech phone call, over a week later no phone call, so phoned again, lady said didn't know what I was talking about as this wasn't the right dept, but would look into it, still no reply, so contacted C&C. Who have arranged to have my machine picked up, on Monday, but stated that this will take up to 8 weeks to be looked at as they are busy, so asked for a refund, as machine not fit for purpose, where do we go when things go wrong, have had this since November, but for couldn't use till mid January. Christmas present, then visitors, so virtually a new machine.,can you help please,

    ReplyDelete
  6. mel,please can you advise how i can get a replacement scan mat,i contacted the brother support uk a week ago and have not received a reply,not sure what to do next.
    thank you susannah

    ReplyDelete
    Replies
    1. Hi Susannah
      Please can you get in touch at melanieheaton@netscape.net so I can sort this out for you.xxx

      Delete
  7. just to add, C&C said this was their decision as to a refund, and I would have to wait,[ the 8 weeks?], to see what their decision is

    ReplyDelete
    Replies
    1. Hi Pat and susannah
      Can you both contact me please at melanieheaton@netscape.net
      Susannah I need you to do this before Monday so we can potentially cancel the collection and get this sorted much quicker if you want a machine that works rather than a refund.
      Thanks
      Melanie xxx

      Delete
  8. Hi Mel, I spoke to you yesterday at the hobbycraft show about the issues I am having with my scanNcut. It is not always joining shapes accurately they can sometimes be off by 1mm or so and also the circles are not perfectly round, they look like I have cut them out with scissors by hand. You indicated the joining problem may be due to using free files that are not perfect, however it is doing this with the alphabets within the machine. You suggested calibrating it which I have done which makes no difference. As I do not remember having these problems when I first had it and I have recently put in a new blade, I have tried putting back in the original blade and then it does cut accurately again. The strange thing has been that when I changed from the original blade to the new blade I had to change the blade cut setting from 3 (with original) to 6 (for new) to cut the same card? Putting the original blade back in I now have to use that on 6 too? Not sure if that is relevant. Do you think as my old blade still cuts accurately that the issue might be a fault with my new blade? Have you come across this problem before? Is there anything I can do to fix this or is it just a matter of getting another new blade? If so how do I go about getting one, can I get a replacement from brother and how would I do that?
    Thanks
    Helen

    ReplyDelete
    Replies
    1. Hi Helen
      That is very strange. Can you contact me at melanieheaton@netscape.net
      I think we need to send you another blade to try.xxx

      Delete
  9. Hi Mel Yesterday I was using my brother and my blade kept moving down as it was cutting from 5 to 4 before I realised what had happened I stopped it and re set it and made sure the blade etc was in correctly and it still kept happening. Any advice please? Hugs Jenny x

    ReplyDelete
    Replies
    1. Hi Jenny
      Yes, take strip of sellotape the depth of the thread and place it arond the thread but not overlapping.
      Hope that makes sense.
      That will solve the issue.
      Hugs
      Melanie xxx

      Delete
  10. Scan and cut 2 weeks old , won't pick up all traced lines when scanning, can anyone help please

    ReplyDelete
  11. Hi Mel,
    Happy Easter. Just wondered how the DVD is coming along. My Sky box is groaning under the volume of Scan N Cut recordings so I'm hoping the DVD will let me free up some space :-)
    Kelly

    ReplyDelete
  12. Hi mel, i need some help with brian. I've had since August but not used it much yet. How can I speak to you? Shirl

    ReplyDelete
  13. This comment has been removed by a blog administrator.

    ReplyDelete
    Replies
    1. Hi Mel, can you tell me why I can't use the Canvas - all I get is ErrS99 and I've tried Googling that to no avail. Thanks.

      Delete