Winter Wonderland Cricut Project Instructions
Products needed
2 x white 12” x12” card stock.
Brown card
Yellow card
Pink card
Turquoise card
Pale blue card
Silver card
Patterned blue and green paper of your choice.
Glitter
Gemstones
Winter Woodland cartridge
Brown fine liner pen
Top Tips.
Cut the pieces for each building and keep them in piles rather than cutting all the brown and all the pink etc at the same time.
When cutting the reindeers, reduce the pressure and blade depth and multi cut them twice.
Doodle your houses and trees. Also ink the edges with a brown ink.
Step by steps
Put your speed on 5, your blade depth on 6 and your pressure on Max.
Place the yellow card onto the mat. Set the size to 4 ½”, press Bldg 1 and cut. Unload. Put brown card on mat. Press shift and bldg1 and cut. Unload. Put pink card on mat, press layers and bldg 1 and cut. Unload. Place white card on mat, press shift and layers and bldg 1 and cut. Unload and set all the pieces to one side.
Place yellow card on your mat. Set the size to 5”. Press Bldg 2 and cut. Unload. Place the pink card onto your mat press shift, bldg 2 and cut. Unload. Put brown card on your mat. Press layers, bldg 2 and cut. Unload. Put white card on mat press shift, layers, bldg 2 and cut.
Unload and set all pieces to one side.
Set the size to 4”. Put yellow card on to the mat. Press Bldg 3 and cut. Unload. Put brown card on to the mat. Press shift and bldg 3 and cut. Unload. Put turquoise card on mat, press layer and bldg 3 and cut. Unload.
Put white card on your mat. Press shift, layers, bldg3 and cut. Unload and put pieces to one side.
Set the size dial to 5”. Put yellow card on mat. Press Bldg4 and cut. Unload. Put blue card on mat. Press shift and Bldg 4 and cut. Unload. Put brown card on mat. Press layer and Bldg 4 and cut. Unload. Put white card on mat, press shift, layers and Bldg 4 and cut. Unload. Put all pieces to one side.
Place the blue patterned paper on the mat. Set the size to 5” Press trees and cut. Unload. Put brown card on your mat. Press shift and trees and cut. Unload. Put white card on mat press layers, trees and cut. Unload.
Repeat all this with the pink card and the size set to 4 ½”. Repeat again with the Green dot card and the Size set to 5 ½”.
Put silver card on the mat. Put the size to 1 ½” Press sleigh and cut. Unload. Put the Blue patterned paper on the mat. Press shift, sleigh and cut. Put the green card on your mat. Press layers and sleigh and cut.
Put the brown card on the mat. Cut a 2 ½” reindeer deer 2. Then press shift and deer 2 and cut. Then put the size dial to 1 ½”. Press shift and deer 2 and cut. Set the size to 2” Press shift and wintr wndrld and cut. Unload.
Put Pink card on mat. Set size to 2 “ Press wint wndrld and cut. Unload. Repeat with white card. Unload. Put green card on mat. Press layers and wntr wndrld and cut.
Put white card on mat and cut various sizes of snowflakes. Press shift and branch 1 and cut at 3 ½”. Unload.
Build all the cut pieces together. Glittering and inking as you go.
Cut a piece of white card at 9” wide by 11” long. Score horizontally at the following. 1” 1 ¼” 1 ½” 1 ¾” 2 ¾” 3” 3 ¼” 3 ½” 4 ½” 4 ¾” 5”
5 ¼” 5 ½” 6” 6 ¼” 6 ¾” 7 ¼” 7 ¾” 8” 8 ½” .
Fold the first scorline as a valley then the next two as a mountain fold and the fourth as a valley. Repeat this process until you complete all the folds.Do not remove the remaining card. Fold it towards you.
Cut a piece of turquoise card 9” wide by 12” long and fold in half. Attach the folded piece of white card to the inside of the front of the turquoise card.
Decorate the turquoise card .
Tear strips of paper to create snow and glitter.
Build up project.
Happy crafting,
Melanie xxx
