Tuesday 10 February 2015

brother scan n cut tips and tricks to make your own basic designs

brother scan n cut tips and tricks to make your own basic designs

https://www.youtube.com/watch?v=Vjh64v7tPPk

Enjoy guys :)

Matt

16 comments:

  1. hi Mel Jodie mentioned that tonic was sending you the Nuvo glue pens to test out on the scanncut mats have you any feed back on these yet ?

    ReplyDelete
    Replies
    1. Hi Jean
      They haven't arrived yet but will let you know as soon as I have tried them.x

      Delete
    2. will be very interested if you find they are good to use thank you in advance x

      Delete
  2. Mel help I am having problems loading my 24inch mat into my scan and cut it says I can not use it I have changed the settings Barb

    ReplyDelete
    Replies
    1. Hi Barb
      Is it just trouble loading? You can't scan the large mat in if that's the issue.
      Come back to me please.xxx

      Delete
    2. Hi Mel I was trying to scan before cutting am I not able to do this x

      Delete
    3. Hi Barb
      Not with the large mat,no.
      You can scan in on the smaller mat and then enlarge it. If you use canvas this is easier as you can group and UNGROUP your shapes to resize.xxx

      Delete
  3. Thanks Mel so it is guess work placing your shapes on your card with the large mat. Thank you for your help x

    ReplyDelete
  4. Hi Mel

    Is there a reason why all of the shapes on the machine are not available in canvas too? I prefer to design in canvas and would like to have access to all of the shapes direct from the Pattern Menu.

    Thanks in advance.

    Sheila

    ReplyDelete
  5. Hi Sheila
    Not sure why but you can always save them to a USB stick and import them into canvas.x

    ReplyDelete
  6. Hi Mel

    Many thanks for your speedy reply. Yes, that's what I currently do.
    P.S. Thanks for your great demonstrations on C&C. I'd never used a cutting machine before and your enthusiasm inspired me to invest in the ScanNCut.

    ReplyDelete
  7. Hi Mel, you are responsible for my purchase of the Scan N Cut as well! I am enjoying your new You Tube videos, very helpful. Is it possible to select a line from a basic shape and turn it into a scoring line? I thought I had just about worked out how to do this and then lost my way! Thanks

    ReplyDelete
  8. This comment has been removed by the author.

    ReplyDelete
  9. Hi Mel and Matt,

    Thanks for all your great Posts they're really helpful! Mel your Shows with the Brother Scan N Cut are just Brilliant and I'm tempted to buy one, but just weighing up if it will be useful to me!? I'm a freelance theatre assistant theatre designer, which involves constructing a lot of 3-d model boxes of the theatre itself ( which is Boring ) and also of the designers set design as well especially furniture. Please check out my stuff at http://skirich.co.uk/page22.htm. especially for furniture I use a 3mm / 5mm foamed PVC, which is fairly dense and works well for the smaller model pieces and larger pieces because joints are stronger than card. But I just wondered if I could send you a sample to try out. I think you mentioned we could do that in one of your shows. I recently saw the show with the Railway model maker so am kinda hooked on getting a Brother Brian and if the foamed PVC works out I'm sold and hopefully the designers I assist would be too. And the Bonus I can use it in my personal crafting too! check out www.richmakes.blog.com ;)
    Look forward to hearing from you
    Richard

    ReplyDelete
  10. Missed you on the blog ..hope everything is OK x

    ReplyDelete