Tuesday 13 December 2011

Gate 7a Ormanental Iron 2 Card.



Gate 7a Ormanental Iron 2 card.

For those crafters who have the smaller Cricuts set your size to 5” instead of 5 ½”.
Make sure your machine is set to relevant size and NOT REAL DIAL SIZE!
Set your pressure and blade depth to suit mirri card.
1.       Put black mirri card on your mat. Set the size to 5 ½”. Press BASE SHADOW, GATE 7a (page 29) and CUT. Remove mat. Remove BASE SHADOW.
2.       Put pink mirri card on your mat. Load mat.  Press SHIFT, BASE SHADOW, GATE 7a and CUT. Unload mat. 
3.       Put silver mirri on your mat. Load mat.  Press GATE 7a and CUT.
4.       Put purple mirri on your mat. Load mat. Press SHIFT LOCK, BASE SHADOW, GATE 7c (page 49) and CUT. Remove mat. Remove BASE SHADOW. Remove SHIFT LOCK.
5.       Put black mirri card on your mat. Press GATE 7c and CUT.
6.       Put purple mirri card on your mat. Press GATE 7b and CUT. Unload mat.
7.       Cut out the centre (butterfly) section using SCISSORS.
8.       Put black mirri card on your mat. Press SHIFT, GATE 7a and CUT.
9.       Build up card as shown in picture.

6 comments:

  1. I made this at Mels class on Sunday at Preston and it IS gorgeous and such a pleasure to make. Lynne

    ReplyDelete
  2. Beautiful! Makes me realise I need to expand the colours in my mirror card collection. :)

    ReplyDelete
  3. This is gorgeous. I do not have cricut but enjoy seeing the results.
    Michaela xx

    ReplyDelete
  4. fabby card! Love the bling! Hugs Juls

    ReplyDelete
  5. Fab card very blingy
    Sandra x

    ReplyDelete
  6. i brought a mini cricut last wk from create and craft but my blades not cutting already could u please tell me what im doing wrong i have blade on six and only cut about a dozen things .you are great and i tape all your shows for tips and to learn from you also presure on 6 am cutting normel card thank you

    ReplyDelete