Saturday, 1 September 2012

Back home and straight back to work!!!

Hello crafters
Well I got home on Thursday night and on Friday morning started work for the next shows!
I am on again next Friday with four different shows, so lots of prep to be getting on with.
I am doing, Hot off the Press, Kaisercraft, Bo Bunny and Jewellery.
I will post sneak peeks throughout the week.
Hope you can tune in. Will post the times once they have been confirmed.
Have a great weekend. I am off now to teach a class.
Take care
Melanie xxx
Posted by at

14 comments:

  1. HiggiSue1 September 2012 at 02:29

    Gosh.... you are one busy lady!
    Hope you have some cricut shows soon too. :-)

    ReplyDelete
  2. annemarks1 September 2012 at 02:57

    Really looking forward to seeing your demos Mel - always inspiring , Anne :)

    ReplyDelete
  3. Unknown1 September 2012 at 05:17

    Hi Mel loved your shows ,the copic was my fav!Could do with some in the COPIC class room with Mel
    Susan xx

    ReplyDelete
  4. allex1 September 2012 at 06:47

    Mel ............ breath !!!!! lol

    Hugs, Sandra :-)

    ReplyDelete
  5. Sandra1 September 2012 at 07:46

    Hi Mel looking forward to the shows :) x

    ReplyDelete
  6. Alison Couchman1 September 2012 at 10:43

    Hi Mel, I was watching one of your demos on C&C and noticed that you use a craft knife that has a nice fat barrel. Can you tell me what make it is please?

    ReplyDelete
    Replies
    1. Melanie1 September 2012 at 12:39

      Hi
      It is an EK Success Cutterbee knife and it is fab!
      X

      Delete
  7. Scrappaddy1 September 2012 at 14:56

    Hi Mel. really looking forward to the up coming shows on Friday. Wondering where you get your refills for the copic pens ? thanks

    carroll xx

    ReplyDelete
    Replies
    1. Melanie8 September 2012 at 02:18

      Hi
      I am having a meeting next week about getting the refills on air. Will let you know then. X

      Delete
  8. Louiseruleauthor4 September 2012 at 06:34

    Hi Mel,
    I wonder if you could help me please. I have a Cricut Create, and since syncing with the CCR my machine has only worked once, but now will not work. That is to say it turns on OK but none of the buttons work, whether I am connected to the laptop or not. I just don't understand. I have updated the firmware, but all to no avail. I would seriously appreciate your input, and if you cannot help me, could you please point me in the right direction, e.g. a phone number. I went on the FAQ on Cricut website, but there wasn't a question to cover my 'problem'. Thank you Mel

    Louise Rule
    louiserule@googlemail.com

    ReplyDelete
    Replies
    1. Melanie8 September 2012 at 02:27

      Hi Louise
      It appears that there is a problem with the craftroom and the Create. Don't worry though, if you email isupport@provocraft.com and add your phone number to your email they will get it all working again. They talk you through the process and all will be well. Let me know how you get on.
      Take care
      Melanie xxx

      Delete
  9. Anonymous5 September 2012 at 02:37

    I have a Cricut Create machine from Craft Superstore that was purchased in November last year. On Saturday I tried to link it to my Mac without success to be able to make use of the Cricut Craft Room design studio. I opened the design studio without any problems, went through the necessary procedure to link my machine but then absolutely nothing. On trying to cut I was asked to insert the cartridge which I did but the programme kept telling me to install the machine, which was already linked to the Mac. I now have a totally useless machine. Before trying to link it, when switching it on the display screen would display something like "insert cartridge" it now says "insert cartridge, link to Gypsy, link to Craft Room. If I insert a cartridge the whole machine freezes and is as good as useless. Without a cartridge in I am able to adjust the settings only. I have googled for a re-set which I have done several times without success. The machine and Mac must have been "talking" at some point for it display Craft Room and Gypsy.

    As it's less than a year old it should be under warranty. Can you please advise me of what to do with it to at least be able to use cartridges again?

    I look forward to hearing from you.

    Many thanks

    Denise Nichols
    denden68@live.co.uk

    ReplyDelete
  10. Melanie5 September 2012 at 03:09

    Hi
    Please email isupport@provocraft.com. Add your phone number so they can call you. Let me know how you get on . Melanieheaton@ Netscape.net
    X

    ReplyDelete
  11. Louiseruleauthor6 September 2012 at 00:11

    I am both sorry to hear and at the same time pleased to hear that it is not a stand alone problem as I thought I may have done something wrong when linking and syncing to the Cricut Craft Room. But the problems that Denise Nichols has experienced is so very similar to mine (even with the display of Craft Room and Gypsy) it must be a Cricut problem. I will indeed let you know how I get on, and hopefully my Cricut will be up and running again very soon, otherwise, like Denise, it will be useless.
    Thanks for the info Mel,
    Regards,
    Louise Rule
    louiserule@googlemail.com

    ReplyDelete

Subscribe to: Post Comments (Atom)